Prg Vx76 User Manual 3.6 Instrukcja Użytkownika Pobierz pdf (Strona 340)

100

101

324 VX76 SOFTWARE USER MANUAL

The coordinates are based on a point of origin (X=0, Y=0, Z=0) from which every object in your 3D graphic has been

located. By defining all three locations, you can achieve an accurate representation of your production in the Graphic

Display window.

+ X - left/right from origin.

+ Y - forward/backward from origin.

+ Z - height from origin.

Note: The Z coordinate (height) sets the top position for the luminaire’s

hook in the 3D graphic. For example, to place a luminaire on a pipe at a

height of 20’-0" to the bottom of the pipe, the luminaire should be placed

at 20’-2" for accurate placement.

3D Orientation

A fixture’s 3D orientation can be entered in the Orientation section of the Patch dialog at the time the luminaire is

initially patched or any time later.

Guidelines:

+ The Patch display shows the current orientation.

+ The defaults set the orientation to common starting positions.

+ The three angular controls allow adjustment.

Point of Origin

(0,0,0)

1 2 ... 335 336 337 338 339 340 341 342 343 344 345 ... 417 418

Komentarze do niniejszej Instrukcji

Brak uwag

Prg Vx76 User Manual 3.6 Instrukcja Użytkownika Strona 340

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Panel sterowania Prg Vx76 User Manual 3.6